Vray rhino interior render settings1/13/2024 This parameter is ignored when Exposure is disabled.į-Number (Number) – The aperture (f-number) parameter determines the lens speed and consequently the brightness of the image. Note that only the color hue is taken into consideration the brightness of the color is ignored. White Balance (Color) – Objects in the scene that have the specified color appear white in the image. When enabled, the Exposure Value, F-Number, Shutter speed and ISO settings affect the image brightness. Physical Exposure On (Boolean) – Enables the Physical Camera Exposure. In orthographic mode the actual distance between the position and the target of the camera is meaningless and the field-of-view angle is set to 180 degrees. Set to 0 for perspective cameras and a greater than 0 value to control the zoom of an orthographic camera. Orthographic zoom factor – Specifies the inverse of the orthographic scene width. Tilt ( Number) – Tilts the camera around its aim vector. Target (Point) – Specifies the camera target point position.įield of View (Number) – Slot for the camera field of view angle measured in degrees. Position (Point) – Specifies the camera point position. The images for the left and right eyes are rendered in a "side by side" or in "top-bottom" layout. Stereo (Integer) – Enables Stereoscopic rendering mode. For VR Spherical mode, the required aspect ratio is 2:1, and for VR Cubemap - 6:1. Switching to any of the VR types does not automatically adjust the output resolution.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |